Canon Service Mode Tool Version 1050 Free Software
Canon Service Mode Tool Version 1050 Free Software
Canon Service Mode Tool is a software that allows you to access the service mode of Canon printers and perform various maintenance tasks. It can help you to reset the waste ink counter, clean the printhead, adjust the alignment, and more. Canon Service Mode Tool Version 1050 is the latest version of this software, and it is compatible with many Canon printer models, such as PIXMA MG, MX, MP, TS, TR, G, E, and IP series.
DOWNLOAD: https://turbusstelbo.blogspot.com/?download=2w3WMZ
In this article, we will show you how to download Canon Service Mode Tool Version 1050 for free, and how to use it to fix some common printer problems.
How to Download Canon Service Mode Tool Version 1050 for Free
Canon Service Mode Tool Version 1050 is not officially available on the Canon website, but you can find it on some third-party websites or forums that offer it for free download. However, you should be careful when downloading any software from unknown sources, as they may contain viruses or malware that can harm your computer or printer. Therefore, we recommend you to scan the downloaded file with an antivirus program before running it.
Here are some steps to download Canon Service Mode Tool V1.050 for free:
Go to a trusted website or forum that offers Canon Service Mode Tool V1.050 for free download. For example, you can try this link: [3]
Click on the "Download" button and save the file to your computer.
Extract the file using a program like WinRAR or 7-Zip.
Open the extracted folder and double-click on the "ServiceTool_V1050.exe" file to run the software.
How to Use Canon Service Mode Tool Version 1050
Before using Canon Service Mode Tool Version 1050, you need to make sure that your printer is connected to your computer via a USB cable, and that it is turned on. You also need to enter the service mode of your printer by following these steps:
Turn off your printer and disconnect the power cord.
Press and hold the "Resume" button (the one with a triangle inside a circle) on your printer.
While holding the "Resume" button, reconnect the power cord and turn on your printer.
Release the "Resume" button and press it twice quickly.
The green LED on your printer should blink slowly. This means that your printer is in service mode.
Now you can use Canon Service Mode Tool Version 1050 to perform various maintenance tasks on your printer. Here are some examples of what you can do with this software:
To reset the waste ink counter, click on the "Main" button under the "Clear Ink Counter" section. This will clear the ink absorber full error message and allow you to print again.
To clean the printhead, click on the "Cleaning" button under the "Ink Absorber Counter" section. This will run a cleaning cycle on your printer and improve the print quality.
To adjust the alignment, click on the "EEPROM" button under the "Test Print" section. This will print a test page with alignment patterns. You can then use the buttons under the "EEPROM Settings" section to adjust the horizontal and vertical alignment values until they are correct.
After you finish using Canon Service Mode Tool Version 1050, you need to exit the service mode of your printer by turning it off and then on again.
Conclusion
Canon Service Mode Tool Version 1050 is a useful software that can help you to fix some common printer problems and extend the life of your printer. However, you should use it with caution and only when necessary, as it may void your warranty or damage your printer if used incorrectly. You should also download it from reliable sources and scan it with an antivirus program before running it.